The automobile water
cooling system consists of water pump, radiator, cooling fan, thermostat, compensation water bucket, water jacket in engine block, cylinder head and other auxiliary devices. Among them, the water pump is a centrifugal water pump, and its function is to pressurize the coolant to ensure that it is in the cooling system.The medium circulation flow is an important part of the
cooling system.

Components of a car water cooling system:
1. Water pump: The water pump is the core component of the
cooling system. The water pump makes the coolant flow and cools the engine. If the water pump is damaged, the water temperature of the engine will rise.
2. Thermostat: The function of the thermostat is to distinguish the size of the cycle, so that the temperature of the engine quickly reaches the ideal state. After the water temperature rises, it can make the effect of fuel saving.
3. Water temperature sensor: Most of the water temperature sensors are installed at the water outlet of the engine, mainly to measure the water temperature of the engine, as a basis for the control of fuel injection.
4. Water tank: A large amount of coolant is stored in the water tank, which is the medium of heat exchange between the engine and the outside world, and can discharge the heat of the engine through the water tank.
5. Water tank fan: When the water temperature reaches a certain temperature, the module will control the work of the electronic fan to discharge the heat in the water tank.
6. Water pipes: There will be no cooling system without the connection of water pipes. There are many water pipes on the car, most of which are rubber hoses. If there is leakage of water pipes, it must be repaired in time.