Brake Pad Induction Wire will have any failures after many years of use?

Brake Pad Induction Wire has been used for a long time, there will be problems such as poor contact of connectors, short circuits between wires and open circuits. Normally, the naturally damaged brake alarm cable will be aging due to the use of too long. Most of the cable harnesses are made of plastic. Plastics are prone to melt and deteriorate in high-heat environments, which will affect the normal use of the product.

Circuit failure will cause damage to the Brake Pad Induction Wire. When the circuit is overloaded, short-circuited, etc., it may cause damage to the brake alarm wire.

There is also a kind of fault caused by human maintenance. Metal parts will press on the Brake Pad Induction Wire when assembling or overhauling auto parts, causing the insulation layer of the brake alarm line to rupture. Generally, this kind of fault is common in car repairs. of.

In addition, the wrong position of the lead wires of the electrical equipment, the reverse connection of the positive and negative leads of the battery, the random connection during the inspection of the circuit failure, and the indiscriminate cutting of the brake alarm wire may cause the electrical equipment to work abnormally and even burn the brake alarm wire.

Generally speaking, Brake Pad Induction Wire must pay attention to the necessary inspection and maintenance after many years of use, so as to avoid some accidents.