Because the trim panel at the
Lifter Switch is made of plastic, it is easy to break the plastic when it is removed with a hard tool such as a knife. You can wrap the head with a soft cloth.
If you can't find the opening to pry open, start prying at these inconspicuous places in front of the veneer. Insert a relatively flat tool into the gap to raise a larger gap, and then use a special tool to disassemble it.
Because of the difference in design, not all models are disassembled in this way. Some may use screws to fix the switch panel, and the door panel needs to be disassembled to continue disassembly.